DIY stretch ceiling
It is quite possible to carry out the installation of a stretch ceiling. Despite the fact that there are several features in technology during the installation of stretch ceilings. Installation of a stretch ceiling should begin, first of all, with the pondering of all light solutions in the room. It is necessary to carry out all the preparatory work that are related directly to future lighting in your room, you need to replace the wiring and prepare the basics for all lamps.
The power limit in light bulbs is fifty watts, it is strictly for a stretch ceiling. After completing all the above work, it is necessary to fix all the profiles on the ceiling or on the walls, depending on which installation method you have chosen. To do this, during the installation of the profile on the walls, it is necessary to determine the lowest point on the ceiling, since the ceilings are quite uneven and often the differences reach several centimeters. From this point, it is necessary to retreat the required distance and with the help of a water level to indicate a clear horizontal line throughout your room. If you have chosen a profile for installation on the ceiling, then it must be firmly fixed to the ceiling, strongly pressing the profile to the wall. First, the profile must be glued with special glue, then additionally fixed with screws.
Well, if you are interested in the interiors paint Tikkuril Joker
– Visit Kraskinadivane. Only there you will find high -quality interior paint at a reasonable price and with fast delivery.
The entire length of the profile between the screws you need to leave a distance of about ten centimeters, you can not fix the screws closer than 1 centimeter from the very edge of the profile. The room must have been warmed up to forty degrees, this temperature should last throughout the installation of the ceiling. But if your tent ceiling fabric to warm up the room has no need.
Next, the canvas must be heated to 60 degrees, using the heat gun. During heating, the canvas will become more elastic. Fasten the canvas in the corners of the room. Then you need to slowly fix each side of the canvas. Using a special spatula. Cut the excesses of the canvas and with the help of a gun, smooth out all the traces from the folds. Turning the gun in a circle. At the end, it is necessary to finish the installation of lighting devices, using special thermal insulating rings. Also, lighting can be mounted on the edge of a stretch ceiling, or behind it.
You can leave a comment.