The technology of a bathhouse from a bar is largely similar to the technology of building a house from the same material – similarly combined the corners of the log house, the foundation is performed, doors and windows are mounted. But there are some features.
For example, before construction, the issue of location should be thoroughly thought out. If there is a stream or river near the site, then it is worth putting a bathhouse nearby. But not very close, so as not to be upset that the flood in the spring, damaged the structure or even washed it off. If the reservoir is not nearby, then it is worth placing the structure next to the pool. It is also advisable to place this structure on a small hill in order to perform unhindered and fairly quick flow of water. In order to increase comfort in the bath, you should also carefully orient the doors and windows to the cardinal points. Windows should be located on the western part, so that in the evening the lighting is better, and at the same time the doors should be oriented south.
If you are interested in OSB stove – visit the site /Catheg /10337
. Only there are the best OSB plates at reasonable prices and with quick delivery.
The base of the bath from the beam is better to perform a columnar, since this option of the foundation provides the opportunity to quickly blow the lower lags and crowns, which will slow down the process of rotting of wood.
If we consider numerous projects, it is obvious that the bathhouse consists, mainly of the two components – the steam room and the dressing room.
The dressing room in most cases is equipped with a table, hangers for clothes and benches. There is a water furnace in the steam room itself. It is better to arrange it in such a way that one of its walls is heated and the dressing room. Quite strict requirements are imposed on the decoration of this part of the bathhouse. For example, there should not be materials from tree species in the decoration that can emit the resin, since it can burn a person during heating and apply a burn injury. For this reason, the most appropriate is to finish with dry lining of aspen. Foil is laid under the casing from the inside. It has good sufficiently heat -saving properties and forms in the bath the “thermos effect”, so to speak, which allows you to save heat for a long time in a boiled bathhouse.
The sizes of the bath should be chosen so that 8-10 people can fit them at the same time. This will allow you to invite friends and relatives to accept bath procedures and relax perfectly.
.