It is one of the types of finishing materials, widely used to level the ceilings and walls indoors. Such plaster is made by mixing knotting substances with water and sand. And since recently, special additives began to be made to its composition that improve some of its characteristics.
The plaster is most often applied both on the brick and concrete surfaces, and on more complex surfaces, such as polystyrene foam or surface with high humidity.
Before applying plaster, the surface should be properly prepared. It is cleaned – remove all kinds of pollution, then washed and thoroughly dried. If necessary, you need to treat the surface with a primer – this is if the base quickly absorbs moisture.
In the process of preparing a solution for plaster, you must be very careful, at the time of adding to a mixture of water. The fact is that then, after you begin to plaster, you will no longer be able to add water to the mixture, as this will adversely affect the quality of the work ongoing. It is also impossible to add to the plaster mix and some kind of third -party components.
After the solution is prepared, we move directly to the process itself. You must apply the finished solution to the surface for half an hour. The solution is applied to the wall using a special tool called the cell, after which it is leveled over the entire surface. If one layer of plaster does not seem enough to you, then you can re -apply the solution only after a day, in any case, not earlier than the first layer completely hardens.
After you have applied a layer of plaster, leave it slightly dry for 30-40 minutes, after which we proceed to leveling. This is done by a wide spatula or special metal rail. Thus, you can easily smooth out all the irregularities – remove the hillocks and recesses. After that it remains to wait when the surface is completely dry. Now you can glue tiles, wallpaper and other finishing materials on it. It is very important how you relate to the process of plastering walls, since in the future your home will look at this. After all, any irregularity will prevent you from gleaming tiles or wallpapers with a qualitatively, which distict the appearance.
You need manual forging in Tula at affordable prices? Details on the site: Kovkagefest