Plaster.
Progress does not stand still, from a simple coating with a solution of trowel and a skillful hand with subsequent staining, plastering methods of decoration evolved to structures supplemented by warming properties and elements that provide strength of this type of external decoration.
Application technology is as follows. The wall on the lower edge is equipped with a basement as a supporting profile. A plastered-red mixture is applied to the wall, and insulation slabs are laid on top of it. The insulation is additionally fixed with dowels based on the solid fastening of the material to the wall. The insulation is strengthened with a reinforced glass wiper, densely covered with plaster-red mixture. This design is primed and covered with a decorative protective layer. Bottom line: thermal insulation, strength, moisture protection and aesthetics.
Glass -fruit sheet.
The sheet includes reinforcing fiberglass and the basis. CML is universal, has high strength, is used for wall decoration, external and internal, ceilings and even floors. The advantages of SML include easy processing and fire safety. At a density of more than 800 kg/cube.m. This material is classified as non -combustible (NG). Environmentally friendly, over time does not distinguish harmful substances. Installation is extremely fast, CML is attached to the adhesive mixture, nailed to the wall with dowels, joints are processed with putties on silicone or acrylic based, then painting is performed. All materials should have a note “for external work”.
Fibrim -cement slabs.
Suitable for internal and external works, places with high humidity, fireproof, environmentally friendly and strong. The surface is smooth and has high adhesion. FCP consist of light concrete and synthetic fiber. The external surface of the ceramic of various textures and coloring can imitate various materials, rejects most types of pollution. Coloring substances are very resistant to climate exposure, which is ensured by a special manufacturing technology. The delivery set includes decorative elements, Klyammers, sometimes sealants and dyes.
FCP is attached using butt guide planks by Klyammers or rivets. Sheets are profiled, which allows them to join the profile, the joints of the joints are equipped with sealing gaskets. Installation begins from below and each subsequent plate is tightly adjusted to the previous. Moisture protection is provided by the presence of a ventilation gap between the panel and the wall, the moisture flows through the lower supporting profile. The air of the ventilation layer circulates in such a way that it prevents the formation of condensate. The joints and places of fastening with dowels are sealed with sealant and stained with special red under the tone of the plates.
The cost of FCP -based coatings are relatively high, but also high and speed of work.
Siding.
There are three types of siding:
wooden;
metal;
Vinyl.
Wooden siding is made of pressed wood fibers and is not a successful solution in our latitudes. Roads and poorly opposes climate. Metal siding uses galvanized steel. This provides fire safety, strength, durability and very high installation rate. In non -industrial applications, PVC siding is most popular. PVC has a lot of advantages, and there are only three disadvantages:
A strong blow to the panel leaves a crack:
Nearby you can’t light a fire, the panel burns no more than 4 seconds, but the melted traces remain;
High coefficient of thermal expansion.
The greatest value of siding is the high installation speed.