Vinyl coating is very aesthetically pleasing, practical and durable. It perfectly resists mechanical influences and is considered unusually wear -resistant. Among other things, this innovative material is not at all difficult to lay down. If desired, installation can be carried out independently.
What surfaces tiles are laid on
Black floor can be made of absolutely any material. The most suitable is the tree. It must be cleaned of dirt, spots and dust. In addition, you need to make sure that the main floor is absolutely dry. Vinyl does not pass moisture, and therefore, if this condition is not observed, the tiles may peel off over time. If the installation of elements is carried out on concrete, waterproofing should first be arranged and, of course, leve the surface.
Vinyl coating installation technology
Start laying from the corner. Previously, from the upper decorative layer, the edge is cut off, so that it is equal to the lower sticky. This part of the tile will be pressed against the wall. Elements do not mount. The entire perimeter of the room between the wall and the flooring should be left clearance of about 5 mm. Having set the first row, they begin to lay the second. It is necessary to make the tiles be shifted relative to each other at least a third of the length. Of course, if they are not square and this allows the pattern. To do this, a piece of the required length is cut off from the initial element. The second row tiles are mounted so that the edge of the decorative layer of the element falls on the sticky layer of the element of the first row.
Some tips
After the installation is made, you need to walk on the coating in order to ensure the best sticking. When calculating the number of necessary elements, it is worth not to emit the fact that when laying parallel to the walls, the material leaves less. With diagonal – more, since there are many scraps left. Before mounting vinyl flooring in areas of pipes or protruding decorative elements, it is worthwhile to open. Then the final result will look much careful.
Installation of such a decorative finish, as you might notice, is completely unusable. Performing everything carefully and adjusting the elements thoroughly, you can perform high -quality coating with excellent working characteristics and very durable.
Video on the topic: